Samba allows linux computers to share files and printers across a network connection. By using its SMB protocol, your linux box can appear in Windows Network Neighborhood or My Network Places just like any other windows machine. Read More
You can share files this way, as well as printers. By using samba on my home network, for example, my Windows machines have access to a printer directly hooked up to my Linux box, and my Linux box has access to a printer directly hooked up to one of my Windows machines. In addition, everyone can access everyone else's shared files. You can see how samba can be very useful if you have a network of both Windows as well as Linux machines. Samba configurations are slightly different depending on the distribution you're using. Therefore, this tutorial explains how it's done on a RedHat Linux machine, as this is my distro of choice, and the only one I've ever installed samba on. The following method has been used by me on RedHat 7.2, 7.3, and 8.
Installing Samba
The first step to configuring samba is, obviously, to make sure that it's installed. In most cases, this will already be the case. It is often a good idea to install the samba daemon package with the RedHat installation. You can test to see if samba is installed by typing rpm -q samba in a terminal. This performs a query on the samba package. If installed, it will indicate the version. If not, it will indicate "package not installed". If samba is not currently installed, there are a multitude of places to get it. The RPM package is available on the RedHat CDs, on the RedHat network, or straight from www.samba.org or one of the samba mirror sites. In addition, you might wish to find it at www.rpmfind.net, a nice resource for RPM packages. Once you have the samba RPM package downloaded somewhere on your harddrive, it's time to install it. Browse to where the file is located and perform one of the following two operations:
if samba is not currently installed, rpm -i samba.rpm (replace samba.rpm with the full version name of the file) if you wish to upgrade your samba version, rpm -U samba.rpm
Now that samba is installed, we can work on configuring this program
smb.conf file
All of samba is configured in one single file, the smb.conf file. This file, located at /etc/samba/smb.conf, allows you to specify which resources on the linux machine you wish to share and who they can be accessed by. A fresh installation of samba will include a sample smb.conf file. This file is completely commented, pointing out all of your available options, and how you can change them. However, samba is an extremely powerful tool, and most casual users have no need for 3/4 of the contents of this sample file. Therefore, I'm providing my own smb.conf file below. If you wish to just share a few folders across a small home LAN, you might be better off basing your own smb.conf file off of mine, as opposed to the long-winded sample file.
[global]
workgroup = PUTIEVILLE
server string = My Lil Linux Box
hosts allow = 192.168. 127. log file = /var/log/samba/%m.
log security = user
encrypt passwords = yes s
mb passwd file = /etc/samba/smbpasswd socket options = TCP_NODELAY SO_RCVBUF=8192 SO_SNDBUF=8192
[Downloads]
comment = Downloads
path = /home/windisk/Downloads
browseable = yes
writable = yes
public = yes read onfiltered= no
[homes]
comment = My Home Directory
browseable = yes
writable = yes
public = yes
read onfiltered= no
[printers]
path = /var/spool/samba
public = yes
guest ok = yes
printable = yes
browseable = yes
writable = yes
read onfiltered= no
Samba Users
Since we're using user level security (the best option when connecting to a WinNT based machine, such as Windows 2000 or Windows XP), we need to set up samba users. First, lets create the smbpasswd file that we defined in the smb.conf file. The best way to go about this is to create it based on your existing /etc/passwd file. In other words, samba users are created based on existing linux users:
cat /etc/passwd mksmbpasswd.sh > /etc/samba/smbpasswd
Chmod 600 this file (/etc/samba/smbpasswd) so that only root has read and write permissions. However, this file only copies over Linux users to samba users. It doesn't copy over their passwords, as well. Therefore, use the following command to set each samba user's password:
smbpasswd username
Obviously, replace username with each of your user's usernames. You will then be prompted to enter a password for this user account. I like to set my samba user's passwords the same as their linux user counterparts. However, this isn't necessary.
Samba Service
Now that everything has been configured, the final step is to start the samba service. Samba runs in the background as a linux daemon. Therefore, it can be controlled by typing:
service smb start
service smb stop
service smb restart
Note that once the computer is restarted or shutdown, the samba service won't start up again the next time. I use the GUI (xwindows) program serviceconf to set up all my services to execute automatically.
Connecting To A Samba Resource
Now that everything should be working, let's test it out. We use the samba client to connect to a samba resource. For testing purposes, we can connect to localhost.
smbclient //localhost/Downloads
You must specify the name of the computer as well as the resource you wish to connect to. In this case, I can connect to the Downloads resource because I specified this resource in my smb.conf file (note it points to /home/windisk/Downloads). Since you are using the samba client while already logged in as a linux user, you will only be prompted for a password. The username will be assumed to be the samba counterpart of the linux username you're currently logged in as. If you wish, you can go to a Windows machine such as Windows XP. If you open My Network Places, and browse to your workgroup, your linux machine should be listed. When trying to access it, you should be prompted with a username and password. This can be any of the samba users you previously created. Once logged in, you should see a listing of all available resources available. Congratulations! Samba should now successfully be set up and working on your network
Installing Samba
The first step to configuring samba is, obviously, to make sure that it's installed. In most cases, this will already be the case. It is often a good idea to install the samba daemon package with the RedHat installation. You can test to see if samba is installed by typing rpm -q samba in a terminal. This performs a query on the samba package. If installed, it will indicate the version. If not, it will indicate "package not installed". If samba is not currently installed, there are a multitude of places to get it. The RPM package is available on the RedHat CDs, on the RedHat network, or straight from www.samba.org or one of the samba mirror sites. In addition, you might wish to find it at www.rpmfind.net, a nice resource for RPM packages. Once you have the samba RPM package downloaded somewhere on your harddrive, it's time to install it. Browse to where the file is located and perform one of the following two operations:
if samba is not currently installed, rpm -i samba.rpm (replace samba.rpm with the full version name of the file) if you wish to upgrade your samba version, rpm -U samba.rpm
Now that samba is installed, we can work on configuring this program
smb.conf file
All of samba is configured in one single file, the smb.conf file. This file, located at /etc/samba/smb.conf, allows you to specify which resources on the linux machine you wish to share and who they can be accessed by. A fresh installation of samba will include a sample smb.conf file. This file is completely commented, pointing out all of your available options, and how you can change them. However, samba is an extremely powerful tool, and most casual users have no need for 3/4 of the contents of this sample file. Therefore, I'm providing my own smb.conf file below. If you wish to just share a few folders across a small home LAN, you might be better off basing your own smb.conf file off of mine, as opposed to the long-winded sample file.
[global]
workgroup = PUTIEVILLE
server string = My Lil Linux Box
hosts allow = 192.168. 127. log file = /var/log/samba/%m.
log security = user
encrypt passwords = yes s
mb passwd file = /etc/samba/smbpasswd socket options = TCP_NODELAY SO_RCVBUF=8192 SO_SNDBUF=8192
[Downloads]
comment = Downloads
path = /home/windisk/Downloads
browseable = yes
writable = yes
public = yes read onfiltered= no
[homes]
comment = My Home Directory
browseable = yes
writable = yes
public = yes
read onfiltered= no
[printers]
path = /var/spool/samba
public = yes
guest ok = yes
printable = yes
browseable = yes
writable = yes
read onfiltered= no
Samba Users
Since we're using user level security (the best option when connecting to a WinNT based machine, such as Windows 2000 or Windows XP), we need to set up samba users. First, lets create the smbpasswd file that we defined in the smb.conf file. The best way to go about this is to create it based on your existing /etc/passwd file. In other words, samba users are created based on existing linux users:
cat /etc/passwd mksmbpasswd.sh > /etc/samba/smbpasswd
Chmod 600 this file (/etc/samba/smbpasswd) so that only root has read and write permissions. However, this file only copies over Linux users to samba users. It doesn't copy over their passwords, as well. Therefore, use the following command to set each samba user's password:
smbpasswd username
Obviously, replace username with each of your user's usernames. You will then be prompted to enter a password for this user account. I like to set my samba user's passwords the same as their linux user counterparts. However, this isn't necessary.
Samba Service
Now that everything has been configured, the final step is to start the samba service. Samba runs in the background as a linux daemon. Therefore, it can be controlled by typing:
service smb start
service smb stop
service smb restart
Note that once the computer is restarted or shutdown, the samba service won't start up again the next time. I use the GUI (xwindows) program serviceconf to set up all my services to execute automatically.
Connecting To A Samba Resource
Now that everything should be working, let's test it out. We use the samba client to connect to a samba resource. For testing purposes, we can connect to localhost.
smbclient //localhost/Downloads
You must specify the name of the computer as well as the resource you wish to connect to. In this case, I can connect to the Downloads resource because I specified this resource in my smb.conf file (note it points to /home/windisk/Downloads). Since you are using the samba client while already logged in as a linux user, you will only be prompted for a password. The username will be assumed to be the samba counterpart of the linux username you're currently logged in as. If you wish, you can go to a Windows machine such as Windows XP. If you open My Network Places, and browse to your workgroup, your linux machine should be listed. When trying to access it, you should be prompted with a username and password. This can be any of the samba users you previously created. Once logged in, you should see a listing of all available resources available. Congratulations! Samba should now successfully be set up and working on your network
No comments:
Post a Comment