Wednesday, October 04, 2006

Sun Solaris - Solution for fsck error at boot time

Hello EB,

Most of time we get some problems with Sun solaris machines at boot time, generally it because of bad sectors or damaged file system. Machine go into File system repair option, so deal with these kind of problems use following commands -

fsck -F (ufs/vxfs) /dev/rdsk/(partition)

noninteractive :fsck tries to repair all the problems it finds in a file system without stopping for user response useful in case of a large number of inconsistencies in a file system but has the disadvantage of removing some useful files which are detected to be corrupt .
If file system is found to have problem at the booting time non interactive fsck fsck is run and all errors which are considered safe to correct are corrected. But if still file system has problems the system boots in single user mode asking for user to manually run the fsck to correct the problems in file system

fsck -F (ufs/vxfs) -Y /dev/rdsk/(partition)

Please use this option at your own risk because it will consider "yes" option for every qwestion so your filesystem might get modified.
Some fsck options as follows -

fsck [ -F fstype] [-V] [-yY] [-o options] special
-F fstype type of file system to be repaired ( ufs , vxfs etc)
-V verify the command line syntax but do not run the command
-y or -Y Run the command in non interactive mode - repair all errors encountered without waiting for user response.
-o options Three options can be specified with -o flag
b=n where n is the number of next super block if primary super block is corrupted in a file system .
p option used to make safe repair options during the booting process.
f force the file system check regardless of its clean flag.
special - Block or character device name of the file system to be checked/repaired - for example /dev/rdsk/c0t3d0s4 .Character device should be used for consistencies check & repair
fsck checks the file system in a series of 5 pages and checks a specific functionality of file system in each phase.
** phase 1 - Check Blocks and Sizes
** phase 2 - Check Pathnames
** phase 3 - Check Connectivity
** phase 4 - Check Reference Counts
** phase 5 - Check Cylinder Groups

1 comment:

Anonymous said...

I would like to exchange links with your site
Is this possible?